ћир lat eng
 
 
 
   News  
NEWS
 
DMDM participation at the gathering: Photonics 2017
September 4, 2017
The Directorate participated in the VI International School and the PHOTONICS 2017 conference http://www.photonica.ac.rs, which was held from 28 August to 1 September 2017 in Belgrade. Two scientific works in the field of metrology were presented at the event:
  • The new system for transfaring units of temperature in optical pyrometry in DMDM - Violeta Stanković, Boban Zarkov, Slavica Simić, DMDM
  • Apllication of virtual instrumentation into the metrology system for optical thermometer calibration -Boban Zarkov, Slavica Simić, DMDM
The works greatly attracted the attention of the professional public.
 
(3)
 
 
Workshop "Exchange of experiences for proper implementation: Welmec 7.2 / Software Guide" was held
August 31, 2017
In the premises of the DMDM, on August 30, 2017, a workshop was held with the topic "Exchange of experiences for proper implementation: Welmec", organized by the Directorate for Measures and Precious Metals (hereinafter: DMDM) and the Serbian Chamber of Commerce (hereinafter: PKS) 7.2 / Software Guide".
The meeting was opened and the audience was addressed by Dr. Branka Radanov, who conducts advisory services for general and legal metrology in DMDM. On behalf of the PKS, the audience was welcomed by Ljubiša Dimitrijević, Secretary of the Association for Professional, Scientific and Technical Activities, expressing his satisfaction about the interest in this topic, emphasizing its importance and the necessity for similar meetings to be held in the future.
 
(6)
 
 
Agreement on Business and Technical Cooperation Signed with the Institute of Physics in Belgrade
June 16, 2017
In the premises of Directorate of Measures and Precious Metals (DMDM) on the June 12, 2017 the Agreement on business and technical cooperation between DMDM and Institute of Physics in Belgrade was signed. The Agreement was signed by Mr. Čedomir Belić, Acting Director of DMDM and Dr. Aleksandar Bogojević, Director of Institute of Physics in Belgrade.
Basic aim of the Agreement is intensification of business and technical cooperation in specific field of metrology, photometry and radiometry, as well cooperation in specialized training of employees of both institutions. Besides, the agreement will be basis for declaration of holder of specific national standards in the field of photometry and radiometry, especially in metrological subfield of optical fibers.
 
(2)
 
 
Students of High Technical School of Professional Studies from Zrenjanin Visited Group for Control and Supervision in Zrenjanin
June 13, 2017
Students of High technical school of professional studies in Zrenjanin visited Group for control and supervision Zrenjanin, regional unit of Directorate of Measures and Precious Metal (DMDM) for the area of Banat.
Students were introduced with basic responsibilities of DMDM and its tasks and duties in the field of metrology which are in function of management of economic, scientific and other organizations as well improvement of the quality of life of all people. After presentation of promo film about DMDM the study visit continued with a tour through laboratories. In laboratory for physical-chemistry measuring instruments to students were demonstrated verification of aerometers.
At the end of the visit the students received answers to questions related to use and means for checking the correctness of measuring instruments used in everyday life.
 
(5)
 
 
EU Journalists Visited Directorate of Measures and Precious Metals
June 12, 2017
Journalists for economic affairs from EU Member States within the delegaion of the European commissar Mr. Johannes Hahn visited Directorate of Measures and Precious Metals (DMDM). Journalists coming from famous news editorial staff of UK, Austria, Greece, Italy and Poland welcomed the Mr. Čedomir Belić, Acting Director of DMDM.
The visit was continued with a tour through DMDM labouratories for mass, DC voltage and control of precious metals articles.
 
(17)
 
 
World Accreditation Day
June 9, 2017
Every year the World Accreditation Day (WAD), a global initiative jointly established by the International Accreditation Forum - IAF and International Laboratory Accreditation Cooperation - ILAC, is celebrated on 9th June to raise awareness of the importance of accreditation-related activities.
This year’s theme focuses on delivering confidence in construction and the built environment. To help explain the use of accredited conformity assessment, the Public Sector Assurance website www.publicsectorassurance.org has been established by IAF, ILAC, ISO and IIOC to showcase different global examples where accreditation has been used to support construction and the built environment. Public Sector Assurance showcases how accredited conformity assessment is used around the world by central government, local government and regulators to deliver positive benefit. To illustrate the value of conformity assessment, case studies from around the world in key policy areas show how different tools help government officials and regulators deliver results. The website covers the following topics: Construction, Crime and Security, Economic Development, Efficient Delivery of Public Services, Energy, Environmental Protection, Food Safety and Agriculture, Health and Safety, Healthcare, Products and Services, Trade.
Read more: http://www.ats.rs/en/news/wad-2017
World Accreditation Day
 
 
International Conference on Quality – JUSK ICQ 2017
June 6, 2017
Within traditional International Conference on Quality – JUSK ICQ 2017, which took place at Faculty of Mechanical Engineering in Belgrade on June 6, 2017, organized by Directorate of Measures and Precious Metals (DMDM), Accreditation Body of Serbia (ATS) and Institute for Standardization of Serbia (ISS) were held the 8th Special conference: “National metrological system – current state and future development”, 9th Special conference: “National accreditation system - current state and future development” and 1st Special conference: “National standardization system - current state and future development”.
The introductory presentations were made by Mrs. Tatjana Bojanić, Acting Director of Institute for Standardization of Serbia, Mrs. Slavica Simić, Acting Assistant Director of Directorate of Measures and Precious Metals and Mr. Radivoje Nikoličić, Acting Assistant Director of Accreditation Body of Serbia.
As in previous years, conference aimed at presentation of numerous works, with emphasis on the results and novelties in the field of metrology, accreditation and standardization in the previous year and included the following presentation:
  • Advantages of the standard implementation in the field of services - Mrs. Tatjana Bojanić, ISS
  • Standardization as important part of the projects – Mrs. Jelena Krupež; Mrs. Jelena Skoković, ISS
  • Transposition and implementation of MID and NAWI directives – Mr. Dragan Pantić and Mr. Predrag Đurić, DMDM
  • Metrology of time, frequency and velocity in the Republic of Serbia – state and future activities – Mrs. Snežana Renovica; Mr. Jovica Cvetković, DMDM
  • Towards a new regulation - accreditation in the field of construction products – Mr. Radivoje Nikoličić, ATS
  • Activities of International organizations for accreditation EA, IAF and ILAC – Mrs. Jasna Stojanović, ATS
 
 
Agreement on Business and Technical Cooperation between Directorate of Standardization, Codification and Metrology and Directorate of Measures and Precious Metals was signed
June 2, 2017
Director of Directorate of Standardization, Codification and Metrology, Mr. Veselin Raičević and Mr. Čecomir Belić, Acting Director of Directorate of Measures and Precious Metals, signed the Agreement on business and technical cooperation in the premises of the Directorate of Measures and Precious Metals on the June 1, 2017.
The aim of the Agreement is interconnection and integration of resources in the fields of mutual interest, better addressing of professional, business and technical issues in the field of metrology.
 
(2)
 
 
Visit of the Czech Metrology Institute representatives
June 2, 2017
On May 30 and June 1, 2017, within the Activity 3.3. Establishing official contacts/networking with European notified bodies, Mission 1 of the Twinning project “Strengthening Capacities of National Quality Infrastructure and Conformity Assessment Services in the Republic of Serbia” Directorate of Measures and Precious Metals (DMDM) visited Dr. Pavel Klenovský, Mr. Jan Kalandra, Dr. Simona Klenovská and Mr. Karel Žáček
Directorate of Measures and Precious Metals (DMDM) visited Dr. Pavel Klenovský, Mr. Jan Kalandra, Dr. Simona Klenovská and Mr. Karel Žáček
 
(2)
 
 
The 11th General Assembly of EURAMET
June 1, 2017
Mr. Čedomir Belić, Acting Director of Directorate of Measures and Precious Metals, attended the 11th General Assembly of EURAMET, Regional Metrological Organization of Europe that coordinates cooperation of the National Metrology Institutes of Europe in the field of metrology. The General Assembly took place in Madrid, Kingdom of Spain from May 15 to 19, 2017. The host of the meeting was National Metrology Institute of Spain, Spanish Metrology Center (CEM).
During the meeting, membership status in EURAMET was discussed and was brought decision on membership of National Metrology Institute of Moldova as Corresponding Associate Member and admission of new Designated Institutes of EURAMET associated members. Besides, future structure of the Board of Directors was considered. New members were elected as well as new Chairperson of EURAMET Technical Committees and new project leaders in EURAMET. Within strategic questions, special emphasis was on strategy of coordination in European metrology, EMPIR Program, related activities and EURAMET priorities. Also, structure and efficiency of EURAMET Secretariat was considered. Rules of Procedure for EMPIR was adopted, new documents for quality management system and team for internal audit as well cycles of audit were determined.
Participation in EURAMET activities is of great significance for metrology and whole economy of our county that creates preconditions for integration of our economy in European trends. Also that realizes the sense of the Meter Convention membership and enables world-wide recognition of our standards, calibration and measurement certificates issued by Directorate of Measures and Precious Metals.
 
 
33rd Committee meeting of European Cooperation in Legal Metrology
June 1, 2017
Mr. Čedomir Belić, Acting Director of Directorate of Measures and Precious Metals, attended the 33rd Committee meeting of European Cooperation in Legal Metrology – WELMEC which took place from May 9 to 12, 2017, in Madrid, Kingdom of Spain. Host of the meeting was Spanish Metrology Center (CEM).
In the meeting were considered the Activity reports from the previous meeting, financial issues related to last year and current year. Cooperation with other organizations and reports of all Working Groups of European Cooperation in Legal Metrology were presented. Also, new member of Presidency, new Committee Chairperson was elected.
Within 33rd Committee meeting of the European Cooperation in Legal Metrology, Symposium on international organizations role in the field of legal metrology and their importance for national economies was held. At that occasion, meeting of measuring instruments manufacturers in the Kingdom of Spain with WELMEC Committee Members was organized.
Membership in European Cooperation in Legal Metrology enables efficient transposition of EU Directives into national legislation and taking the obligations of the EU Member States in a manner fully harmonized with the EU legislation.
 
 
The Second Info Session on “Raising Awareness on Metrology in the Republic of Serbia” was held in Vojvodina Chamber of Commerce and Industry.
May 29, 2017
The second Info session on “Raising awareness on metrology in the Republic of Serbia” within the Twinning project “Strengthening Capacities of National Quality Infrastructure and Conformity Assessment Services in the Republic of Serbia” was held in Vojvodina Chamber of Commerce and Industry on May 25, 2017.
The participants were welcomed by: Mr. Nenad Petković, Secretary of Association of Industry in Vojvodina Chamber of Commerce, Dr. Branka Radanov, Advisor for scientific and legal metrology of Directorate of Measures and Precious Metals (DMDM) and Mr. Karel Žáček, Standing Advisor for Twinning Project in the Republic of Serbia.
The DMDM representatives: Ms. Tamara Đekić and Mr. Dragan Nikolić presented to the participants the Quality Management System of the DMDM, as well as traceability of measurement results in metrology.
The colleagues from the Czech Metrology Institute (ČMI): Mr. Pavel Nováček, Mr. Peter Kiška and Mrs. Kristýna Vančurová presented to the participants operations and marketing activities of ČMI, their national standards, calibration and measurement capabilities as well as participation in international projects.
As well as at previous Info session the participants were mostly interested in topics in the field of legal metrology.
 
U PKV održana je druga info sesija „Podizanje svesti o metrologiji u Republici Srbiji“
(10)
 
 
The Info session on “Raising awareness on Metrology in the Republic of Serbia” was held in Serbian Chamber of Commerce and Industry.
May 25, 2017
Within the Twinning project: “Strengthening Capacities of National Quality Infrastructure and Conformity Assessment Services in the Republic of Serbia” the Info session on “Raising awareness on Metrology in the Republic of Serbia” was held in the Serbian Chamber of Commerce and Industry on May 24, 2017.
The participants were welcomed by: Mr. Ljubiša Dimitrijević, Secretary of Association of Professional, Scientific and Technical Activities, Dr. Branka Radanov PhD, Advisor for Scientific and Legal Metrology of Directorate of Measures and Precious Metals (DMDM) and Karel Žáček, Standing Advisor for Twinning in the Republic of Serbia. Mr. Ljubiša Dimitrijević expressed his satisfaction that great number of measuring instruments manufacturer, notified bodies performing measuring instruments verification and other interested partied showed interest for this important topic.
The DMDM representatives: Dr. Branka Radanov PhD, Ms. Sonja Milojković and Mr. Dragan Pantić presented to the participants importance of Metrology, role of the DMDM in harmonization of metrological regulation with European regulation, improvement of DMDM capacities as well as notification process for notified bodies as new DMDM competence.
The colleagues from the Czech Metrology Institute (ČMI): Mr. Pavel Nováček, Mr. Peter Kiška and Ms. Kristýna Vančurová presented to the participants operations and marketing activities of ČMI, their national standards, Calibration and Measurement Capabilities as well as participation in international projects.
Info session topics made great interest which showed useful discussion.
 
U PKS održana info sesija „Podizanje svesti o metrologiji u Republici Srbiji“
(18)
 
 
Celebration of the World Metrology Day in DMDM
May 23, 2017
The Directorate of Measures and Precious Metals (DMDM) marked the World Metrology Day – the 20th of May on Monday, May 22. The Acting Director of DMDM Mr. Čedomir Belić gathered and congratulated the DMDM employees, holiday which this year was marked under the slogan “Measurements for Transport”.
In cooperation with Museum of Science and Technology on the 20th May within the Museum Night manifestation, for the first time meter prototype No 30 was shown to the wider public. The first Serbian national standard of meter is kept in DMDM and it was declared for cultural property. During the Museum Night and on the World Metrology Day, opportunity to see the meter prototype used several thousands of people.
The ceremony of this significant date attended the representatives of the Ministry of Economy, Institutions of quality infrastructure, metrology laboratories as well as the representatives of the University of Belgrade. The guests were welcomed by the Acting Director Mr. Čedomir Belić. Concert on the organ was performed by Ms. Marija Družjančić and after that on behalf of the Museum of Science and Technology the guests were welcomed by Saša Šepec, museum curator who presented them the museum exhibits with the special emphasis on central exhibit, the archival meter. Among the exhibits were objects from the DMDM rich collection.
 
Marking the World Metrology Day in DMDM
(32)
 
 
The Students from the Faculty of Mathematics from Kosovska Mitrovica visited Directorate of Measures and Precious Metals.
May 19, 2017
Traditionally within the activities to mark the World Metrology Day on May 20, we were visited by our dear guests, the Students of the Faculty of Mathematics University of Priština from Kosovska Mitrovica. Students of the second year within teaching from subject Metrology and measuring results processing with Branko Drljača, Assistant Professor had opportunity to be introduced with the importance and history of Metrology in Serbia and work of National Metrology Institute (DMDM). Study visit was continued visiting laboratories for temperature, DC voltage, time, frequency, photometry, large volumes, length, acoustics and mass where Metrologists presented them realized calibration methods and research projects the DMDM participates in.
 
The Students from the Faculty of Mathematics from Kosovska Mitrovica visited Directorate of Measures and Precious Metals.
(4)
 
 
Students from Faculty of Mechanical Engineering of University of Belgrade Visited the Directorate of Measures and Precious Metals
Маy 18, 2017
Within the activities to mark the World Metrology Day on May 20, as well as promotion of importance and significance of metrology, students of second, third and fourth year from the Faculty of Mechanical Engineering of University of Belgrade visited Directorate of Measures and Precious Metals (DMDM). Students were led by Dr. Đorđe Čantrak, Assistant Professor and Dr. Dejan Ilić, Assistant Professor.
On behalf of DMDM the Students were welcomed by Mrs. Ana Gajić, Advisor for Analytical, Professional and Operational Affairs, who introduced them with work and history of DMDM as well as with long tradition of metrology in Serbia. The visit was continued with a tour through laboratories for: temperature, DC voltage, time, photometry, large volumes, length, acoustics and mass, where they were presented realized calibration methods and research directions in which DMDM participates in.
 
Студенти Maшинског факултета Универзитета у Београду посетили су Дирекцију за мере и драгоцене метале
(6)
 
 
Regulation on Termination of Validity Certain Regulations was Published
April 19, 2017
In the „Official Gazette of RS”, No. 34/17 of April 11, 2017, was published:Regulation on Termination of Validity Certain Regulations.
With the entry into force of this Regulation, the following Regulations cease to be valid:
  1. Regulation on metrological requirements for instruments for measuring loop resistance (“Official Gazette of SFRY”, No. 3/84)
  2. Regulation on metrological requirements for measuring instruments for electrical insulation resistance (“Official Gazette of FRY”, No. 3/98)
  3. Regulation on metrological requirements for measuring instruments for electrical resistance grounding (“Official Gazette of FRY”, Nos. 34/98 and 40/98 – correction)
  4. Metrological Instruction for examination of measuring instruments for electrical resistance grounding (“Gazette of SZMDM”, 2-3/99)
  5. Regulation on the manner of recognition of foreign certificates, seals and conformity markings (“Official Gazette of RS”, No 86/10).
The Regulation shall enter into force on April 19, 2017.
 
 
Regulation on Criteria for Determining the Costs for Measuring Instruments Verification was Published
April 19, 2017
In the ”Official Gazette of RS”, No. 34/17 of April 11, 2017, was published:Regulation on Criteria for Determining the Costs for Measuring Instruments Verification.
This Regulation prescribes the criteria for determining the verification costs for measuring instruments specified by the price list of the authorized body.
Regulation shall enter into force on April 19, 2017.
 
 
Cooperation Agreement Between Directorate of Measures And Precious Metals And City of Zrenjanin was signed
March 29, 2017
Mr. Čedomir Janjić, Mayor of Zrenjanin city, and Mr. Čedomir Belić, Acting Director of the Directorate of Measures and Precious Metals of the Republic of Serbia, signed the Agreement on bussines and technical cooperation in the City Hall of Zrenjanin on March 23, 2017. The Directorate will give way to the city of Zrenjanin part of its business offices in Jevrejska street in Zrenjanin. Besides establishing business and technical cooperation Agreement establishes favorable conditions for business improvement of the city of Zrenjanin as well as of Directorate.
Mr. Čedomir Janjić, Mayor of Zrenjanin city expressed gratitude to the Ministry of economy and Directorate for cooperation inorder to improve quality of providing services to the citizens. After that the Directorate building was visited by Mr. Čedomir Janjić, Mayor of Zrenjanin, with associates and Mrs. Snažana Vučurević, Chief of Srednjebanatski Administrative District.
 
Potpisan Sporazum o saradnji između Grada Zrenjanina i Direkcije za mere i dragocene metale
(3)
 
 
Mrs. Slavica Simić was Appointed to Acting Assistant Director for Metrology Development Sector.
March 28, 2017
By the decision of the Government of the Republic of Serbia 24 number: 119-2293/2017 from March 23, 2017 Mrs. Slavica Simić was appointed to Acting Assistant Director of Directorate of Measures and Precious Metals for Metrology Development Sector. Mrs. Slavica Simić was born in Bor in 1969. She aquired B.Sc. degree in 1995 at School of Electrical Engineering, University of Belgrade, department of Phisical Electronics, Optoelectronics and laser technology. From 1996 she aquired experience in Directorate of Measures and Precious Metals as Metrologist for temperature, later as Head of Section for thermometry. She has been many years deputy of the Head of quality system for calibration/examination (SRPS 17025) and integrated management system (SRPS 9001, SRPS 14001 и SRPS OHSAS18001). So far she participated in Quality infrastructure development projects in the Republic of Serbia, CARDS 2006, IPA 2008 and IPA 2011 as well in development projects in the field of Thermometry NOTED project (EMRP program) and Eura-Thermal and HUMEA (EMPIR program).
 
 
Training for Implementation of Module D and F in MID/NAWI
March 17, 2017
Within PTB Project on support of the Quality Infrastructure in Serbia was held Training for implementation of Module D and F in MID/NAWI. Trainer was Mr. Wolfgang Mikovits from the National Metrology Institute of Austria – BEV. Training was held in Directorate of Measures and Precious Metals from March 13 – 16, 2017. In addition to participants from Directorate of Measures and Precious Metals, the training was attended by representatives of Institute of Metrology of B&H.
Training was divided in two parts. The first part referred to implementation of Module F/F1 in MID/NAWI. It covered notified bodies under MID and NAWI, introduction into Module F/F1, WELMEC Guide 8.10 Sampling plans for statistical verification and procedure for implementation of Module F/F1 in BEV.
The second part of the training referred to implementation of Module D/D1 in MID/NAWI. This part covered introduction into Module D/D1, standard EN ISO/IEC 17021 for implementation of Module D in MID/NAWI and procedure for implementation of Module D/D1 in BEV. After attending this very comprehensive and professional training, participants received Certificates of attendance, which are necessary for further work in the specified area.
 
Training for Implementation of Module D and F in MID/NAWI
(5)
 
 
Quality week 2017
March 10, 2017
The “Quality week 2017” took place from March 1 to 3, 2017. It was organized by the Foundation of Quality Culture and Excellence FQCE and Quality & Excellence Magazine in cooperation with Chamber of Commerce of Serbia, supported by the Ministry of Economy of the Republic of Serbia. This traditional event, 26th in a row, gathered numerous experts from science, economy and eminent experts in the field of quality so that through exchange of experience and examples from praxis of successful organizations they discuss about current topics in the field of quality and business excellence.
The Quality Infrastructure representatives of the Republic of Serbia welcomed the participants at the beginning of the event. The event attended Mr. Čedomir Belić, Acting Director of Directorate of Measures and Precious Metals emphasizing importance of measuring infrastructure for further prosperity and improvement of the quality of life of citizens.
Also, this year numerous papers were presented which showed once again, that culture of quality has great importance in our society.
 
Quality week 2017
(2)
 
 
Directorate of Measures and Precious Metals is Accredited and Designated for Conformity Assessment
February 6, 2017
Accreditation Body of Serbia (ATS) granted accreditation to Certification body of Directorate of Measures and Precious Metals for conformity assessment activities. Scope of accreditation of the Certification body of Directorate of Measures and Precious Metals according to the standard SRPS EN ISO/IEC 17065:2016 is type examination of: non-automatic weighing instruments, active electrical energy meters and taximeters.
Directorate of Measures and Precious Metals was designated for conformity assessment of weighing instruments with the relevant requirements of Regulation on non-automatic weighing instruments - type examination and for conformity assessment of measuring instruments with the relevant requirements from Annex I of Regulation on measuring instruments and requirements from appropriate instrument-specific Annex according to conformity assessment procedure Module B – Type examination.
Sertifikat
 
 
The Twinning Project - Continuation of Activities
February 28, 2017
The Activity 3.1 „Trainings and consultancy to DMDM for implementation of MID, NAWI and Pre – packages, extension of the accreditation scope, improvement of existing Serbian measurement standards, obtaining new calibration and measuring capabilities”, within Twinning project “Strengthening Capacities of National Quality Infrastructure and Conformity Assessment Services in the Republic of Serbia”, commenced in June 2016, was finished by mission that took place at Directorate of Measures and Precious Metals on February 21 and 22, 2017.
The Experts from the Czech Metrology Institute recommend adoption of Quality Management System of conformity assessment for modules of conformity assessment in accordance with EU directives on metrology transposed into legislation of the Republic of Serbia.
The Single market Strategy is the European Commission plan and fourth priority policy area of the Commission. In a changing environment single market should adapt to new ideas and business models. Full implementation of the EU directives and compliance with the technical requirements are necessary for the realization of national and international competitiveness.
 
The Twinning Project - Continuation of Activities
(4)
 
 
Continuation of Activities within the Twinning Project
February 2, 2017
Second Mission of the Activity 3.1 „Trainings and consultancy to DMDM for implementation of MID, NAWI and Pre-packages, extension of the accreditation scope, improvement of existing Serbian measurement standards, obtaining new calibration and measuring capabilities”, within Twinning project “Strengthening Capacities of National Quality Infrastructure and Conformity Assessment Services in the Republic of Serbia” was performed at the Directorate of Measures and Precious Metals from January 23 to 25, 2017.
The representatives of the Czech Metrology Institute (CMI) through consultative talks with the representatives of the Directorate of Measures and Precious Metals analyzed the Directorate of Measures and Precious Metals from the perspective of preparation for designated (notified) body for the EU directives transposed into legislation of the Republic of Serbia. They emphasized that designations are one of prerequisites for the EU Membership.
The findings collected during the Mission confirmed capacities of the Directorate of Measures and Precious Metals for conformity assessment and are reference for further arangements as designated body for the EU directives on metrology.
 
Continuation of Activities within the Twinning Project
(8)
 
 
New Service of Directorate of Measures and Precious Metals - Calibration of Reference Materials
January 26, 2017
Directorate of Measures and Precious Metals, as of 2017, starts the production of Certified Reference Materials (CRMs)– ethanol in water solutions, for the purpose of calibration and/or verification of measuring instruments (alcometeres, breath analyzers).
Reference materials are in dark glass bottles, 1 L volume.
Each RM is accompanied by a Calibration Certificate for the given concentration. Available concentrations can be seen in Catalogue of Services (II CERTIFIED REFERENCE MATERIALS).
This activity, or a new service, was realized by the Group for Metrology in Chemistry, Laboratory for Reference Materials.
Reference materials
 
 
Activity of PTB Project „Quality Infrastructure Support in the Republic of Serbia“
January 24, 2017
Within the Project “Quality infrastructure support in the Republic of Serbia” which carries out National Metrology Institute of Germany PTB, Head of Supervision sector of the Metrology Institute of the Republic of Slovenia, Mrs. Dušanka Škrbić visited DMDM from January 16 to 19, 2017.
At the ocasion analyses of situation of development of the Information system was made. The Information system will cover whole metrological supervision and follow verification of measurement instruments with the constructive proposals for finding better solutions. Also she transferred the practice solutions to colleagues from the Control and supervision sector of DMDM in order to perform more efficient and effective metrological supervision, through discussions as well as through joint execution of Market supervision in the field.
 
Activity of PTB Project „Quality infrastructure support in the Republic of Serbia“
(3)
 
 
Staff Training for Internal Auditors for Testing and Calibration Laboratories According to the Standard SRPS ISO / IEC 17025:2006.
January 13, 2017
According to the need to increase the number of internal auditors on the of January 11 and 12, 2017, at the premises of the Directorate of Measures and Precious Metals was realized training of staff for internal auditors for calibration and testing laboratories according to the standard SRPS ISO/IEC 17025:2006 Requirements - General competence requirements for testing and calibration laboratories. Training was realized by StandCert business company for certification and supervision from Belgrade.
 
Obuka zaposlenih za interne proveravače za laboratorije za ispitivanje i etaloniranje prema standardu SRPS ISO/IEC 17025:2006
(4)
 
 
News - 2016 News - 2015
News - 2014 News - 2013
News - 2012 News - 2011
News - 2010